Welcome, jerks.


Yeah, I got the fever. Three or four years ago, a rabid, red-eyed zombie sank its rotten teeth into my arm and thus I was infected with a peculiar strain of irrational obsession. Since then I have breathed, eaten, and slept bikes and almost nothing else. Maybe a vaccine will be invented, or maybe it'll simply pass, but until then I'm a slave to my compulsion to buy, transport, take apart, degrease, scour, lube, polish, assemble, tune, tighten, align, wax, buff, and yes, ride, ride, ride these magical two-wheeled machines.

So, the idea is, on this page I'm going to post pictures and perhaps stories of bikes that I've refurbished and ridden or ones that are in the process or recently completed. Maybe it'll expand from there. We'll see, I guess.

Friday, November 30, 2012

'81 Fuji America

One of the most revered of the classic Fuji models, the America was produced for a decade or so, from the early '70s to the early '80s. From what I understand, it was marketed as a touring bike for the "discerning" (read: "spendthift") cyclist. (A 1980 Bicyling Magazine review cast it as a touring bike for wealthy roadies.) Fittingly, this one is set up with some of the best parts of the day: Suntour Superbe calipers, Cyclone derailleurs, Sugino Mighty Tour crankset, sealed bearing hubs, etc. While I would never take it touring--limited tire/fender clearance and short chain stays--it seems to me well suited for randonneur purposes--low trail geometry, sturdy wheels, a crankset that could easily be converted into a wide-range double.
This one received routine maintenance, new folding Pasela TG tires (700x28) and other comsumables, and Velo Orange hammered fenders (that barely fit). When the rear wheel proved to have a nasty hop that caused some annoying fender rub, I rebuilt it using a new Velocity Twin Hollow rim (which I picked up at Rivendell, after a short chat with GP about wheel building). The Twin Hollow has a very similar profile to the original Ukai and it builds up nicely.












Schwinn Voyageur SP

During the mid '80s, Schwinn made two full-on touring bicycles: the Voyageur and the Voyageur SP. As its name suggests, the SP model was constructed of high-end Columbus SP (and SL) tubing. It also generally featured a few more braze-ons and better componentry than the regular Voyageur model.

This '85 Voyageur SP frameset I received through a trade. It came to me in rough aesthetic condition: the paint had succumbed to some mysterious ailment whereby it had chipped off in dozens and dozens of tiny spots to reveal the white primer beneath. In effect, it looked like someone had ridden the bike through a puddle of white paint. In addition, the paint on the chromed fork had contracted a similar strain of leprosy and it was rapidly chipping away in larger chunks. Since the worst of it was on the fork crown, I initially tried just stripping the paint there by masking the rest and spraying on a light coat of aircraft stripper. Unfortunately, the stripper penetrated the masking tape and I ended up having to take all the paint off the fork. Fortunately, the chrome was in good shape and it came out nicely anyway. For the rest of the frame, I went with touch-up paint. This was a tedious process with mixed results. In certain lighting, the end product looked fine, but in bright light the color difference became more pronounced. Were I to do it over, I'd probably opt for a fresh powdercoat. That is, I've decided that touch-up paint on an old bike is the precise equivalent of a facelift for an aging spinster: not quite convincing and vaguely pathetic. On the other hand, a powder coat is more like a visit to a day spa and a new outfit off the clearance rack at Macy's: rejuvenating and tasteful if not quite lavish.









E